BR900G-GR Features
Power-Saving Back-UPS Pro 900, 230V, Schuko
-
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
-
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
-
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
-
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Back-UPS Pro Features & Benefits
Manageability
-
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
-
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
-
Audible alarms
Provides notification of changing utility power and UPS power conditions
-
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Marketing Features
-
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
-
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
-
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
-
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
-
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Serviceability
-
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
-
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Availability
-
Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down. Power to peripherals is immediately restored when the master device wakes up or is switched on.
-
Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.
-
Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.
-
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
-
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
-
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Protection
-
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
-
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
-
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Safety
Output
-
Output power capacity
540 Watts / 900 VA
-
Max Configurable Power (Watts)
540 Watts / 900 VA
-
Nominal Output Voltage
230V
-
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
-
Output Frequency (not synced)
50/60 Hz +/-1 Hz
-
Topology
Line Interactive
-
Output Connections
(2) Schuko CEE 7 (selector_surgetitle)
(3) Schuko CEE 7 (Battery Backup)
-
Transfer Time
8ms typical : 10 ms maximum
Input
Batteries & Runtime
Communications & Management
-
Interface Port(s)
Optional Simple Signalling RS232 cable , USB
Surge Protection and Filtering
-
Surge energy rating
613 Joules
-
Data Line Protection
RJ-11 Modem/Fax/DSL protection (two wire single line), RJ-45 Modem/Fax/DSL/10-100 Base-T protection
Physical
-
Maximum Height
250 , 25.0 cm
-
Maximum Width
100 , 10.0 cm
-
Maximum Depth
382 , 38.2 cm
-
Net Weight
10.73 kg
-
Shipping weight
12.41 kg
-
Shipping Height
487 , 48.7 cm
-
Shipping Width
225 , 22.5 cm
-
Shipping Depth
337 , 33.7 cm
-
Units per Pallet
30.0
Environmental
-
Operating Environment
0 - 40 °C
-
Operating Relative Humidity
0 - 95 %
-
Operating Elevation
0-3000 meters
-
Storage Temperature
-15 - 45 °C
-
Storage Relative Humidity
0 - 95 %
-
Storage Elevation
0-15000 meters
-
Audible noise at 1 meter from surface of unit
45.0 dBA
Conformance
Sustainable Offer Status
-
RoHS
Compliant
-
REACH
REACH: Contains No SVHCs
-
PEP
Available in Documentation tab
-
EOLI
Available in Documentation tab
